AMENDMENTS PROPOSED BY THE HOUSE COMMITTEE ON MINING AND MINERAL RESOURCES

1. Page 1, introduced, Title, line 14, after 45.1-161.269,

insert

45.1-161.270,

2. Page 1, introduced, line 34, after 45.1-161.269,

insert

45.1-161.270,

3. Page 7, introduced, line 34, after knowingly

strike

make

insert

makes

4. Page 17, introduced, line 38, after armor;

insert

and

5. Page 19, introduced, line 7, after grounded

insert

phase

6. Page 27, introduced, after line 54

insert

§ 45.1-161.270. Safety measures on equipment.

A. Rubber tired or crawler mounted equipment shall have rollover protective structures to the extent required by 30 CFR 77.403a.

B. Seat belts shall be maintained in all mobile equipment that are required to have rollover protective structures under subsection A. Operators of such equipment shall wear seat belts when the equipment is in motion.

C. Mobile equipment shall be equipped with adequate brakes and parking brakes.

D. Cab windows shall be of safety design, kept in good condition and clean for adequate visibility.

E. Tires shall be deflated before repairs on them are started and adequate means shall be provided to prevent wheel locking rims from creating a hazard during tire inflation.

F. An audible warning device and headlights shall be provided on all self-propelled mobile equipment.

G. An automatic backup alarm, that is audible above surrounding noise levels, shall be provided on all mobile equipment. An automatic reverse-activated strobe light may be substituted for an audible alarm when mobile equipment is operated at night.

H. All equipment raised for repairs or other work shall be securely blocked prior to persons positioning themselves where the falling of such equipment could create a hazardous condition.