prev | next

9VAC25-151-110. Sector C - Chemical and allied products manufacturing.

A. Discharges covered under this section. The requirements listed under this section apply to stormwater discharges associated with industrial activity from facilities engaged in manufacturing the following products and generally described by the SIC code shown:

1. Basic industrial inorganic chemicals (including SIC Code 281);

2. Plastic materials and synthetic resins, synthetic rubbers, and cellulosic and other humanmade fibers, except glass (including SIC Code 282);

3. Medicinal chemicals and pharmaceutical products, including the grading, grinding and milling of botanicals (including SIC Code 283);

4. Soap and other detergents, including facilities producing glycerin from vegetable and animal fats and oils; specialty cleaning, polishing, and sanitation preparations; surface active preparations used as emulsifiers, wetting agents, and finishing agents, including sulfonated oils; and perfumes, cosmetics, and other toilet preparations (including SIC Code 284);

5. Paints (in paste and ready-mixed form); varnishes; lacquers; enamels and shellac; putties, wood fillers, and sealers; paint and varnish removers; paint brush cleaners; and allied paint products (including SIC Code 285);

6. Industrial organic chemicals (including SIC Code 286);

7. Nitrogenous and phosphatic basic fertilizers, mixed fertilizer, pesticides, and other agricultural chemicals (including SIC Code 287). Note: SIC Code 287 includes Composting Facilities (SIC Code 2875);

8. Industrial and household adhesives, glues, caulking compounds, sealants, and linoleum, tile, and rubber cements from vegetable, animal, or synthetic plastics materials; explosives; printing ink, including gravure ink, screen process and lithographic inks; miscellaneous chemical preparations, such as fatty acids, essential oils, gelatin (except vegetable), sizes, bluing, laundry sours, and writing and stamp pad ink; industrial compounds, such as boiler and heat insulating compounds; and chemical supplies for foundries (including SIC Code 289); and

9. Ink and paints, including china painting enamels, India ink, drawing ink, platinum paints for burnt wood or leather work, paints for china painting, artists' paints and artists' water colors (SIC Code 3952, limited to those listed; for others in SIC Code 3952 not listed above, see Sector Y (9VAC25-151-320)).

B. Special conditions. Prohibition of nonstormwater discharges. In addition to the general prohibition of nonstormwater discharges in Part I B 1, the following discharges are not covered by this permit: inks, paints, or substances (hazardous, nonhazardous, etc.) resulting from an on-site spill, including materials collected in drip pans; washwaters from material handling and processing areas; or washwaters from drum, tank, or container rinsing and cleaning.

C. Numeric effluent limitations. In addition to the numeric effluent limitations described in Part I A 1 c, the following effluent limitations shall be met by existing and new discharges with phosphate fertilizer manufacturing runoff. The provisions of this paragraph are applicable to stormwater discharges from the phosphate subcategory of the fertilizer manufacturing point source category (40 CFR 418.10). The term contaminated stormwater runoff shall mean precipitation runoff, that during manufacturing or processing, comes into contact with any raw materials, intermediate product, finished product, by-products or waste product. The concentration of pollutants in stormwater discharges shall not exceed the effluent limitations in Table 110-1.

Table 110-1
Sector C Numeric Effluent Limitations

Parameter

Effluent Limitations

Daily Maximum

30-day Average

Phosphate Subcategory of the Fertilizer Manufacturing Point Source Category (40 CFR 418.10) - applies to precipitation runoff that, during manufacturing or processing, comes into contact with any raw materials, intermediate product, finished product, by-products or waste product (SIC 2874)

Total Phosphorus (as P)

105 mg/L

35 mg/L

Fluoride

75 mg/L

25 mg/L

D. Benchmark monitoring and reporting requirements. Agricultural chemical manufacturing facilities; industrial inorganic chemical facilities; soaps, detergents, cosmetics, and perfume manufacturing facilities; and plastics, synthetics, and resin manufacturing facilities are required to monitor their stormwater discharges for the pollutants of concern listed in Table 110-2 below.

Table 110-2
Sector C Benchmark Monitoring Requirements

Pollutants of Concern

Benchmark Concentration

Agricultural Chemicals (SIC 2873-2879)

Total Nitrogen

2.2 mg/L

Total Recoverable Iron

1.0 mg/L

Total Recoverable Zinc

120 μg/L

Total Phosphorus

2.0 mg/L

Industrial Inorganic Chemicals (SIC 2812-2819)

Total Recoverable Aluminum

750 μg/L

Total Recoverable Iron

1.0 mg/L

Total Nitrogen

2.2 mg/L

Soaps, Detergents, Cosmetics, and Perfumes (SIC 2841-2844)

Total Nitrogen

2.2 mg/L

Total Recoverable Zinc

120 μg/L

Plastics, Synthetics, and Resins (SIC 2821-2824)

Total Recoverable Zinc

120 μg/L

Composting Facilities (SIC 2875)

Total Suspended Solids (TSS)

100 mg/L

Biochemical Oxygen Demand (BOD5)

30 mg/L

Chemical Oxygen Demand (COD)

120 mg/L

Ammonia

2.14 mg/L

Total Nitrogen

2.2 mg/L

Total Phosphorus

2.0 mg/L

Statutory Authority

62.1-44.15 of the Code of Virginia; 402 of the federal Clean Water Act; 40 CFR Parts 122, 123, and 124.

Historical Notes

Derived from Virginia Register Volume 15, Issue 9, eff. June 30, 1999; amended, Virginia Register Volume 20, Issue 16, eff. July 1, 2004; Volume 25, Issue 19, eff. June 24, 2009; Volume 30, Issue 11, eff. July 1, 2014.


prev | next | new search | table of contents | home